MARSH NATURAL SOLUTIONS™ Phosphate reduction without chemical dosing Find out more

Enquiries

Enquiries

We would be delighted to hear from you and will can to respond to your email enquiries within 24 hours. Thank you for your interest in Marsh Industries.

    Advanced sewage treatment plant

    Marsh WellWater:SeineTM

    Ø1.1m pump station

    WellWater Seine pump station range

    Marsh WellWater:Seine pump stations are available in storage capacities ranging from 141 to 5675 litres.

    Each system is supplied as a complete unit with either single or twin free-standing submersible pumps and high quality internal pipework/fittings as standard.

    These pump stations are typically used in smaller domestic or commercial applications for pumping foul water or sewage to mains sewer.

    All Marsh pump stations are available for dirty water (DW) or sewage (SW), in single pump (SP) and twin pump (TP) configurations.

    Configuration and components are shown for illustration purposes only

    Operating principle

    KEY

    1. Inlet
    2. Submersible pump(s) – Single or twin free-standing options
    3. Pump retrieval chain
    4. Non-return valve(s)
    5. Gate valve

    6. Outlet connection

    7. Ducting and cable entry points

    8. Vent

    9. Manway access

    10. Float bracket

    Float configuration options
    A. Pump ‘OFF’ float switch
    B. Pump 1 ‘ON’ float switch
    C. Pump 2 ‘ON’ float switch (on twin pump configurations)
    D. High water float switch

    Note: Floats can be fitted directly to specific pump systems. Please contact Marsh Industries to discuss your project requirements.

    Marsh WellWater Seine diagram

    Benefits

    • Designed to British Standard European Norm’s:
      BSEN12050 for structural strength and water-tightness
      BSEN752 to comply with hydrostatic and electrical requirements
      BSEN752-6 for drain and sewer systems in outside buildings
    • Smooth internal walls and integral pump well improves pump efficiency and eliminates ‘dead spots’ which can lead to odours and septicity
    • Variable invert depths and orientations ­­­to suit individual site conditions
    • Pre-assembled pipework for fully automatic operation
    • Unique ‘keying-in’ lip on WellWater:Seine range assists anchoring into concrete surround

    Specifications

     
    Specifications table
    Model Single/Twin pump Pump duty
    (See table below)    		 Application Diameter
    +/-50mm    		 Depth
    +/-50mm    		 Capacity (Litres) Invert Pipework dia
    SE0610 Single A Effluent 600 1000 141 500 32
    SE0615 Single A Effluent 600 1500 282 500 32
    SE0620 Single A Effluent 600 2000 424 500 32
    SE1111 Single A Effluent 1100 1100 570 500 32
    TE1111 Twin A Effluent 1100 1100 570 500 32
    SE1115 Single A Effluent 1100 1500 950 500 32
    TE1115 Twin A Effluent 1100 1500 950 500 32
    SE1122 Single A Effluent 1100 2200 1616 500 32
    TE1122 Twin A Effluent 1100 2200 1616 500 32
    SE1126 Single A Effluent 1100 2600 1996 500 32
    TE1126 Twin A Effluent 1100 2600 1996 500 32
    SS0610 Single B Sewage 600 1000 141 500 63
    SS0615 Single B Sewage 600 1500 282 500 63
    SS0620 Single B Sewage 600 2000 424 500 63
    SS1111 Single B Sewage 1100 1100 570 500 63
    TS1111 Twin B Sewage 1100 1100 570 500 63
    SS1115 Single B Sewage 1100 1500 950 500 63
    TS1115 Twin B Sewage 1100 1500 950 500 63
    SS1122 Single B Sewage 1100 2200 1616 500 63
    TS1122 Twin B Sewage 1100 2200 1616 500 63
    SS1126 Single B Sewage 1100 2600 1996 500 63
    TS1126 Twin B Sewage 1100 2600 1996 500 63
    TS1721 Twin C Sewage 1700 2100 2724 500 63/90
    TS1734 Twin D Sewage 1700 3400 5675 500 90

     
     
    Specifications table
    Pump duties Total lift : 1m 2m 3m 4m 5m 6m 7m 8m
    A Effluent pumping stations Distance m : 54 43 30 20 8 – – –
    B Up to TS1126 – 6m total head Distance m : 160 120 90 40 10 – – –
    C TS1721 – 10m Total Head Distance m : – 700 620 530 430 340 250 160
    D TS1734 – 7.4m Total Head Distance m : – – 180 120 90 50 5 –

    > Floats can be fitted directly to specific pump systems. Please contact Marsh Industries to discuss your project requirements.
    > All pump stations are available for dirty water (DW) or sewage (SW), in single pump (SP) and twin pump (TP) configurations
    > The dimensions given on this page are for guidance only
    > For precise tank sizes and configurations, please contact Marsh Industries
    > All dimensions in mm

    Optional extras

    Alarm systems

    Pump station alarms monitor the level of liquid inside the units. An alarm signal is generated when there is an excessive level of liquid, or if the unit requires emptying.

    Marsh Industries can supply various types of alarm, as well as bespoke options as required.

    • Beacon alarms
    • Klaxon and beacon alarms
    • SMS Alarms
    • Micro SMS battery alarms
    • Micro SMS solar panel alarms

    GRP kiosks

    Marsh GRP kiosks provide safe and secure storage of electrical control panels and other tank monitoring equipment.

    The kiosks are typically fitted with one or two doors, depending on kiosk size, with stainless steel vents and yale locks.

    Commissioning and servicing

    Marsh Industries offers a nationwide service to cover all aspects of commissioning and servicing on the Marsh WellWater pump station range.

    Commissioning and servicing packages can be tailored to customer requirements from basic comissioning contracts to commisioning and full service contracts, including on-going support and advice.

    Advice and guidance

    For advice and guidance on choosing the right products for your site please contact Marsh Industries on +44 (0)1933 654582 or email contracts@marshindustries.co.uk.

    Resources

    Marsh Civils product portfolio and specifications

    PDF

    Marsh-Civils-product-portfolioDownload