Oil separator alarm systems

For oil separators, wash-down units and silt traps

An oil separator alarm monitors the level of liquid in oil separator units. An alarm signal is generated when there is an excessive level of oil, liquid or silt, or when the unit requires emptying.

An oil separator alarm is required on all separators to prevent hydrocarbons from entering the drainage system, and to ensure safe and economic operation of the unit.

Marsh Industries can supply various types of oil level, silt level and high level alarms, as well as bespoke options as required.

All alarms supplied by Marsh comply with EN858 parts 1&2, provide explosion protection and are ATEX approved.

For advice and guidance on choosing the right alarm for your site please contact Marsh Industries on +44 (0)1933 654582 or email separators@marshindustries.co.uk.

Specifications

Mains alarm

Suitable for sites where mains supply is available.

Alert: Beacon or SMS text message (optional)
High quality oil probe with 5m cable
Probe range 200 metres max (dependent on cable style)
240V control panel
IP65 ABS enclosure
Supplied with junction box

Battery alarm

Battery alarms are suitable for sites where mains supply is not
readily available or for retrofitting.

Alert: Beacon or SMS text message (optional)
Probe range: 200 metres max (dependent on cable style)
Powered by 4×1.5V alkaline D cell batteries
IP65 ABS enclosure
Manual probe status check

Solar alarm

Suitable for remote locations and where mains power is unavailable.

Alert: Beacon or SMS text message (optional)
High quality oil probe with 5m cable
Intuitive control panel
Supplied with battery plus backup battery
Supplied with clean contact relay
Alarm stand rotates 360 degrees